Home

Hi,
I need a very good condition rear hub. It would replace my mavic 501 with a broken axle. So the same again would be great ( without broken axle obviously!! )

If not campagnolo sr or chorus

126mm spacing

English screw hub

32 or 36 hole.

Cheers
Olly

5 comments

Avatar
madame_mercian [3 posts] 4 years ago
0 likes

Hi Olly,

I have a rear English-threaded Mavic 501 hub with 126mm axle spacing. It's in great condition, having been used only briefly and then carefully de-laced. I also have the front hub to match it.

If you're interested, send me an e-mail address to which I can send you photos.

Cheers,

Justine in NY, USA

Avatar
mattsccm [324 posts] 4 years ago
0 likes

Is that the one with the Mavic logo on a plaque sort of thing?
Got 2, one with 28 holes rear, tother 232 rear.
Gloucestershire.

Avatar
madame_mercian [3 posts] 4 years ago
0 likes

Hello Again,

My 501 hubs are the ones with a gray band on the "shelf" of the left flange. There's no engraving or plaque one them.

The rear is English threaded, with a 126 axle. Both the front and rear are drilled for 36 spokes.

If you're interested, please write to me at

justineisadream [at] hotmail.com.

Thanks you,

Justine in NY, USA, a.k.a. Madame Mercian

Avatar
monkeys_paw [23 posts] 4 years ago
0 likes

Hi Justine!

Thanks for getting back to me.
I have found a hub and had a loverly new rear wheel built.
Thanks anyway!!!

Cheers
olly

Avatar
madame_mercian [3 posts] 4 years ago
0 likes

Thanks!