Single sped chain life

by wigdog   September 11, 2011  

I have a Charge Mixer 8, it has an eccentric bottom bracket which is now at the extreme front of it's adjustment and the chain is limp. If I turn the eccentric all the way to the back and remove a link the chain is too short to be joined back together.
Am I just being tight and should just get a new chain or am I missing something about the available adjustment?
I have done about 3800 miles on this chain.

Any thoughts appreciated. Confused

4 user comments

Oldest firstNewest firstBest rated

Well 3800 miles on a chain is quite a bit, i'd just fork out and get a new one if your using your bike alot

Gkam84's picture

posted by Gkam84 [8683 posts]
11th September 2011 - 20:21

like this
Like (1)

Get yourself a new chain!! Especially if you are doing that kind of mileage.

giff77's picture

posted by giff77 [1036 posts]
11th September 2011 - 21:10

like this
Like (1)

Okay, new chain it is - got my eye on a nice red number to 'complement' the black frame!

Cheers Smile

wigdog

wigdog's picture

posted by wigdog [12 posts]
12th September 2011 - 9:40

like this
Like (1)

time for a new one me thinks, I can recommend KMC chains, I got a bog standard £7 job from my LBS & it's been ace so far, plus replacing it doesn't hurt too much...

Carpe Diem ab absentis: seize the day off

Coodsta's picture

posted by Coodsta [95 posts]
12th September 2011 - 11:09

like this
Like (0)