Ksyrium Elite pot hole damage - terminal?

by SPAM Naval   January 18, 2011  

Hi,
I damaged my rear wheel on my commute home last night. I'm assume i hit one of London's notorious potholes a bit too hard. The result is that two spokes are no longer attached to the hub body - one of the (plastic) raised parts of the hub which anchors the spokes to the hub in pairs has broken off. Its a Mavic Ksyrium Elite wheel about two years old in otherwise very good nick. Is this all over for the wheel or fixable (new hub?) at less than the cost of a new one. Any advice would be great, thanks.
Brendan

6 user comments

Oldest firstNewest firstBest rated

Theoretically you should be able to change the hub and replace the spokes. Not sure how much would that cost though.

Stephanos's picture

posted by Stephanos [23 posts]
18th January 2011 - 12:18

like this
Like (2)

I'm sure that the bit which attaches the spokes is aluminium, not plastic. This is true even on the Mavic wheels with pointless carbon fibre hub shells.

two wheels good; four wheels bad

posted by cat1commuter [1339 posts]
18th January 2011 - 12:50

like this
Like (1)

well for my 2p worth i think it kinda depends on the rim and if you can build wheels.. sounds like the hub is unusable so if you can get a new/second hand compatible hub, new spokes and the rim isn't to worn then you could build yourself a new wheel. but if the rim hasn't got much life left you prob. better off getting a new wheel. buying a new hub and then getting a LBS to build it for you may not be much cheaper than a new wheel..

Fringe's picture

posted by Fringe [1081 posts]
18th January 2011 - 15:22

like this
Like (2)

hey lookee here, new hub for you

http://road.cc/content/forum/28833-mavic-wheel-stuff

Fringe's picture

posted by Fringe [1081 posts]
18th January 2011 - 15:23

like this
Like (1)

Guys
Thanks for the feedback, very helpful. It's definitely a plastic part of the hub body (they;re probably 2008 wheels I think). i'm probably going to go down the road of buying a new wheel cos i agree i think trying to buy a new hub body and rebuild the wheel with a three year old rim isn't worth it (for now I'll revert to the original Mavic Aksium rear wheel that i have as a spare).
anyone need some Elite spokes, you know where to come now.. Big Grin

posted by SPAM Naval [136 posts]
18th January 2011 - 16:57

like this
Like (2)

just a note to cat1commuter, you were right the bit that broke is aluminium (thats what you get for looking in semi-darkness i guess!).
i'm back in action anyway after putting back on the Aksium last night. thanks chaps

posted by SPAM Naval [136 posts]
19th January 2011 - 13:48

like this
Like (0)